CME U-Key Manuel d'utilisateur télécharger pdf (Page 17)

6 ASSIGNING

6.1 Assigning Joystick

z Operation：【SHIFT】ÖC#4【Assign Joystick】Ö【Set value】Ö【ENTER】

z Value (controller#) range：0-145

z The center position of the joystick will send data 0, and the lowerst position will send

data 127.

z Please refer to the appendix

8.1<Assignable controller list> for more detail.

6.2 Assigning Slider

z Operation：【SHIFT】ÖD#4【Assign Slider】Ö【Set value】Ö【ENTER】

z Value (controller#) range：0-146

z The most left position of the slider will send data 0, and the most right position will

send data 127.

z Please refer to the appendix

8.1<Assignable controller list> for more detail.

6.3 Assigning Pedal

z Assigning pedal A：【SHIFT】ÖF#4【Assign Pedal A】Ö【Set value】Ö【ENTER】

z Assigning pedal B：【SHIFT】Ö

G#4【Assign Pedal B】Ö【Set value】Ö【ENTER】

z Value (controller#) range：0-163

z Please refer to the appendix

8.1<Assignable controller list> for more detail.

You can change the pedal polarity. (

7.2)

6.4 Assigning DATA Button

You can assign the【- DATA +】buttons to one of the fllowing functions:

z Octave shift (default)：【SHIFT】Ö

C#1【DATA-Octave】

z Transpose：【SHIFT】Ö

D#1【DATA-Transpose】

z Bank MSB：【SHIFT】Ö

F#1【DATA-Bank MSB】

z Bank LSB：【SHIFT】Ö

G#1【DATA-Bank LSB】

z Program change：【SHIFT】Ö

A#1【DATA-Program】

z Channel：【SHIFT】Ö

C#2【DATA-Channel】

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 25 26

Pas de commentaire

CME U-Key Manuel d'utilisateur Page 17