CME GPP-3 Spécifications télécharger pdf (Page 78)

AT command set for XX Siemens mobile phones and modems

_________________________________________________________________________________________

Document No.: A30880-A10-A001-XX-

D376

Revision: Master R75

Revision Date: 29. September, 2004

AT+CSCB?

+CSCB: <mode

>,<mids>,<dcss>

Parameter:

<mode

See Test command

<mids

String type; combinations of CBM message IDs

<dcss

String type; combinations of CBM data coding schemes

Write command

AT+CSCB=[<mode>[,<mids>[,<dcss>]]]

Parameter:

<mode>

See Test command

<mids>

String type; combinations of CBM message IDs

<dcss>

String type; combinations of CBM data coding schemes

AT+CSMS

AT+CSMS Selection of message service

Revision according to 3GPP TS 27.005 Version 5.0.0

Test command Response:

AT+CSMS=?

+CSMS: (list of supported <service

>s)

Parameter:

<service

> 0

GSM 03.40 [6] and 03.41 [7]

GSM 03.40 [6] and 03.41 [7] and compatibility of the AT

command syntax for phase 2+

Note: Deactivating phase 2+ compatibility is only possible if the

direct output of short messages AT+CNMI=1,2 or

AT+CNMI=1,3 is not activated. If necessary, the latter should

be deactivated first

Read command Response:

AT+CSMS?

+CSMS: <service

>,<mt>,<mo>,<bm>

Parameter:

<service

See Test Command

<mt

Mobile terminated messages

Type supported

<mo

Mobile originated messages

Type supported

<bm>

Broadcast type messages

Type not supported

Write command

AT+CSMS= <service>

Response:

+CSMS: <mt

>,<mo>,<bm>

OK/ERROR/+CME ERROR

Parameter:

<service

See Test Command

2.5 Modem commands

This section provides the descriptions of modem commands.

AT+CBST

AT+CBST Select bearer service type

Selects the bearer service <name> with data rate <speed> and the connection element <ce> to be

used when data calls are originated.

Test command Response:

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 151 152

Commentaires sur ces manuels

Pas de commentaire

CME GPP-3 Spécifications Page 78

Commentaires sur ces manuels