CME GPP-3 Spécifications Page 47
- Page / 164
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
3GPP
3GPP TS 27.007 V6.3.0 (2003-
06)
4
7
Release 6
7.4 Facility lock +CLCK
Table 37: +CLCK action command syntax
Command
Possible response(s)
+CLCK=<fac>,<mode>[,<passwd>
[,<class>]]
+CME ERROR: <err>
when <mode>=2 and command successful:
+CLCK: <status>[,<class1>
[<CR><LF>+CLCK: <status>,<class2>
[...]]
+CLCK=?
+CLCK: (list of supported <fac>s)
+CME ERROR: <err>
Description
Execute command is used to lock, unlock or interrogate a MT or a network facility <fac>. Password is normally
needed to do such actions. When querying the status of a network service (<mode>=2) the response line for 'not active'
case (<status>=0) should be returned only if service is not active for any <class>. Refer subclause 9.2 for possible
<err> values. This command should be abortable when network facilities are set or interrogated.
Call barring facilities are based on GSM/UMTS supplementary services (refer 3GPP TS 22.088 [6]). The interaction of
these with other commands based on other GSM/UMTS supplementary services is described in the GSM/UMTS
standard.
Test command returns facility values supported as a compound value.
Defined values
<fac> values reserved by the present document:
"CS" CNTRL (lock CoNTRoL surface (e.g. phone keyboard))
"PS" PH-SIM (lock PHone to SIM/UICC card) (MT asks password when other than current SIM/UICC card
inserted; MT may remember certain amount of previously used cards thus not requiring password when they
are inserted)
"PF" lock Phone to the very First inserted SIM/UICC card (also referred in the present document as PH-FSIM)
(MT asks password when other than the first SIM/UICC card is inserted)
"SC" SIM (lock SIM/UICC card) (SIM/UICC asks password in MT power-up and when this lock command
issued)
"AO" BAOC (Barr All Outgoing Calls) (refer 3GPP TS 22.088 [6] clause 1)
"OI" BOIC (Barr Outgoing International Calls) (refer 3GPP TS 22.088 [6] clause 1)
"OX" BOIC-exHC (Barr Outgoing International Calls except to Home Country) (refer 3GPP TS 22.088 [6] clause
1)
"AI" BAIC (Barr All Incoming Calls) (refer 3GPP TS 22.088 [6] clause 2)
"IR" BIC-Roam (Barr Incoming Calls when Roaming outside the home country) (refer 3GPP TS 22.088 [6] clause
2)
"NT" barr incoming calls from numbers Not stored to TA memory
"NM" barr incoming calls from numbers Not stored to MT memory
"NS" barr incoming calls from numbers Not stored to SIM/UICC memory
"NA" barr incoming calls from numbers Not stored in Any memory
"AB" All Barring services (refer 3GPP TS 22.030 [19]) (applicable only for <mode>=0)
- V6.3.0 (2003-06) 1
- Contents 3
- 3GPP TS 27.007 V6.3.0 (2003 4
- Release 6 4
- Foreword 7
- 2 References 8
- 3.1 Definitions 12
- 3.2 Abbreviations 12
- 4 AT command syntax 13
- 5 General commands 15
- +CME ERROR: <err> 18
- 5.10 Informative examples 22
- 6.4 Call mode +CMOD 25
- 6.5 Hangup call +CHUP 25
- is implemented 26
- 6.8 Radio link protocol +CRLP 29
- 6.23 Silence Command +CSIL 40
- 6.27 Informative examples 42
- 7.1 Subscriber number +CNUM 43
- 7.3 PLMN selection +COPS 45
- 7.4 Facility lock +CLCK 47
- 7.5 Change password +CPWD 48
- 7.10 Closed user group +CCUG 52
- 7.12 Call waiting +CCWA 55
- 7.14 Call deflection +CTFR 57
- 7.16 Advice of Charge +CAOC 59
- 7.18 List current calls +CLCC 61
- PLMNwAcT 64
- PLMNsel 64
- OPLMNwAcT 64
- HPLMNwAcT 64
- 7.27 Informative examples 68
- 8.3 Enter PIN +CPIN 72
- 8.4 Battery charge +CBC 73
- 8.5 Signal quality +CSQ 74
- 8.7 Keypad control +CKPD 75
- 8.8 Display control +CDIS 76
- 8.9 Indicator control +CIND 77
- 8.15 Clock +CCLK 83
- 8.16 Alarm +CALA 84
- 8.17 Generic SIM access +CSIM 85
- 8.20 Alert sound mode +CALM 88
- 8.21 Ringer sound level +CRSL 88
- 8.22 Vibrator mode +CVIB 89
- 8.24 Mute control +CMUT 90
- 8.29 Power class +CPWC 92
- 8.30 Set Language +CLAN 93
- 8.31 Language Event +CLAE 94
- 8.32 Set Greeting Text +CSGT 94
- 8.36 Master Reset +CMAR 97
- 8.38 Delete alarm +CALD 98
- ...[<lsapN>]] 100
- 8.43 Informative examples 101
- MODE 103
- DATA MODE 103
- 9.2.1 General errors 105
- 9.2.2 GPRS-related errors 106
- 9.2.2.3 Other GPRS errors 107
- 10 Commands for Packet Domain 108
- (Obsolete) 128
- 11 Commands for VGCS and VBS 137
- ELEASED (default value) 140
- USHED for an infinite time 140
- The MT assumes to be 142
- 11.4 Informative examples 146
- Annex A (normative): 147
- Annex B (normative): 149
- Summary of result codes 149
- Annex C (informative): 151
- Commands from TIA IS-101 151
- C.1 Introduction 151
- C.2 Commands 152
- C.2.7 Inactivity timer +VIT 154
- C.2.8 Line selection +VLS 154
- C.2.9 Receive data state +VRX 156
- C.2.12 Tone duration +VTD 157
- Annex D (informative): 159
- Bibliography 159
- Annex E (informative): 160
- Annex F (informative): 161
- Annex G (informative): 162
- Voice call example 162
- Annex H (informative): 163
- Change History 163
Produits connexes et manuels pour Pédale de musique CME GPP-3
Pédale de musique CME GPP-3 Spécifications
(152 pages)
(152 pages)
© 2020, manymanuals.fr. Tous droits réservés | 1.868 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels