CME GPP-3 Spécifications Page 93
- Page / 164
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
3GPP
3GPP TS 27.007 V6.3.0 (2003-
06)
9
3
Release 6
Read command returns the currently selected output power class and default output power class for each supported
frequency band (as defined by MT manufacturer). Parameter <band1> and its associated power class parameters refer
to the currently used frequency band. For example, +CPWC: 2,1,1,5,4,0 in case of a dual-band MT currently
using band GSM1800, for which the power class is currently set to 2, the default being class 1, and for which the
currently set power class value for GSM900 is class 5 the default being class 4.
Test command returns supported bands and their power classes. For example,
+CPWC: (0,(0,4,5)),(1,(0-2)) in case of a dual-band handheld MT.
Defined values
<class>, <curr_classn>s, <def_classn>s:
0
default (not applicable to <curr_class>s or <def_classn>s)
1… MT output power class as in GSM 45.005 [38]
<band>, <bandn>s:
0
GSM900
1 GSM1800
2 reserved for GSM1900
3 GSM 400
Implementation
Optional.
8.30 Set Language +CLAN
Table 90: +CLAN parameter command syntax
Command
Possible response(s)
+CLAN=<code>
+CME ERROR: <err>
+CLAN?
+CLAN: <code>
+CME ERROR: <err>
+CLAN=?
+CLAN:(list of supported <code>s)
+CME ERROR: <err>
Description
This command sets the language in the MT. The set-command must confirm the selected language with the MMI-
module in the MT. If setting fails, a MT error, +CME ERROR: <err> is returned. Refer subclause 9.2 for <err> values.
The <code>-parameter is a two-letter abbreviation of the language. The language codes, as defined in ISO 639, consists
of two characters, e.g. "sv", "en" etc.
The complete set of language codes to be used are manufacturer specific and should all be possible to use with the
command. Some examples are described under <code>. For a complete list see ISO 639.
The read command gives the current language as output. If the language has been set to "AUTO", the read command
returns the current language set from the SIM-card /UICC. Hence, the "AUTO"-code is never returned by the read-
command.
Test command returns supported <code>s.
Defined values
<code>: (not all language codes are present in this list)
"AUTO" Read language from SIM-card /UICC. "Auto" is not returned by the read-command.
- V6.3.0 (2003-06) 1
- Contents 3
- 3GPP TS 27.007 V6.3.0 (2003 4
- Release 6 4
- Foreword 7
- 2 References 8
- 3.1 Definitions 12
- 3.2 Abbreviations 12
- 4 AT command syntax 13
- 5 General commands 15
- +CME ERROR: <err> 18
- 5.10 Informative examples 22
- 6.4 Call mode +CMOD 25
- 6.5 Hangup call +CHUP 25
- is implemented 26
- 6.8 Radio link protocol +CRLP 29
- 6.23 Silence Command +CSIL 40
- 6.27 Informative examples 42
- 7.1 Subscriber number +CNUM 43
- 7.3 PLMN selection +COPS 45
- 7.4 Facility lock +CLCK 47
- 7.5 Change password +CPWD 48
- 7.10 Closed user group +CCUG 52
- 7.12 Call waiting +CCWA 55
- 7.14 Call deflection +CTFR 57
- 7.16 Advice of Charge +CAOC 59
- 7.18 List current calls +CLCC 61
- PLMNwAcT 64
- PLMNsel 64
- OPLMNwAcT 64
- HPLMNwAcT 64
- 7.27 Informative examples 68
- 8.3 Enter PIN +CPIN 72
- 8.4 Battery charge +CBC 73
- 8.5 Signal quality +CSQ 74
- 8.7 Keypad control +CKPD 75
- 8.8 Display control +CDIS 76
- 8.9 Indicator control +CIND 77
- 8.15 Clock +CCLK 83
- 8.16 Alarm +CALA 84
- 8.17 Generic SIM access +CSIM 85
- 8.20 Alert sound mode +CALM 88
- 8.21 Ringer sound level +CRSL 88
- 8.22 Vibrator mode +CVIB 89
- 8.24 Mute control +CMUT 90
- 8.29 Power class +CPWC 92
- 8.30 Set Language +CLAN 93
- 8.31 Language Event +CLAE 94
- 8.32 Set Greeting Text +CSGT 94
- 8.36 Master Reset +CMAR 97
- 8.38 Delete alarm +CALD 98
- ...[<lsapN>]] 100
- 8.43 Informative examples 101
- MODE 103
- DATA MODE 103
- 9.2.1 General errors 105
- 9.2.2 GPRS-related errors 106
- 9.2.2.3 Other GPRS errors 107
- 10 Commands for Packet Domain 108
- (Obsolete) 128
- 11 Commands for VGCS and VBS 137
- ELEASED (default value) 140
- USHED for an infinite time 140
- The MT assumes to be 142
- 11.4 Informative examples 146
- Annex A (normative): 147
- Annex B (normative): 149
- Summary of result codes 149
- Annex C (informative): 151
- Commands from TIA IS-101 151
- C.1 Introduction 151
- C.2 Commands 152
- C.2.7 Inactivity timer +VIT 154
- C.2.8 Line selection +VLS 154
- C.2.9 Receive data state +VRX 156
- C.2.12 Tone duration +VTD 157
- Annex D (informative): 159
- Bibliography 159
- Annex E (informative): 160
- Annex F (informative): 161
- Annex G (informative): 162
- Voice call example 162
- Annex H (informative): 163
- Change History 163
Produits connexes et manuels pour Pédale de musique CME GPP-3
Pédale de musique CME GPP-3 Spécifications
(152 pages)
(152 pages)
© 2020, manymanuals.fr. Tous droits réservés | 2.100 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels