3GPP TS 27.007 V6.3.0 (2003-
06)
Implementation
Optional.
8.28 Call Meter maximum event +CCWE
Table 88: +CCWE parameter command syntax
+CCWE: <mode>
+CME ERROR: <err>
+CCWE: (list of supported <mode>s)
+CME ERROR: <err>
Description
Shortly before the ACM (Accumulated Call Meter) maximum value is reached, an unsolicited result code +CCWV will
be sent, if enabled by this command. The warning is issued approximately when 30 seconds call time remains. It is also
issued when starting a call if less than 30 s call time remains. If setting fails in an MT error, +CME ERROR: <err>
is returned. Refer subclause 9.2 for <err> values.
Read command returns the current setting.
Test command returns supported settings.
Defined values
<mode>:
0
Disable the call meter warning event
1 Enable the call meter warning event
Implementation
Optional.
8.29 Power class +CPWC
Table 89: +CPWC parameter command syntax
+CPWC:
<curr_class1>,<def_class1>,<band1>
[,<curr_class2>,<def_class2>,<band
2>[...]]
+CME ERROR: <err>
+CPWC: list of supported (<band>,(list of
<class>s)) pairs
+CME ERROR: <err>
Description
This command is used to set the preferred MT power class for each GSM frequency band supported. The interaction of
this setting with the selected bearer service (+CBST and HSCSD commands) is manufacturer specific (for example,
selecting a multislot operation might reduce the power class automatically). If setting fails in an MT error, +CME
ERROR: <err> is returned. Refer subclause 9.2 for <err> values.
Commentaires sur ces manuels