CME GPP-3 Spécifications télécharger pdf (Page 68)

3GPP

3GPP TS 27.007 V6.3.0 (2003-

06)

Release 6

<message> (type of message containing the outgoing User-to-User Information Element)

0 ANY

1 SETUP

2 ALERT

3 CONNECT

4 DISCONNECT

5 RELEASE

6 RELEASE_COMPLETE

<messageI> (type of message containing the intermediate User-to-User Information Element)

0 ANY

1 ALERT

2 PROGRESS

3 CONNECT (sent after +COLP if enabled)

4 RELEASE

<messageU> (type of message containing the unsollicited User-to-User Information Element)

0 ANY

1 SETUP (returned after +CLIP if presented, otherwise after every RING or +CRING)

2 DISCONNECT

3 RELEASE_COMPLETE

< UUIE>: the User-user Information Element (as defined in 3G 24.008) in hexadecimal character format (for

hexadecimal format, refer +CSCS).

NOTE: If the TA does not distinguish the type of message containing the User-to-user Information Element, it

can use the value for ANY message.

Implementation

Optional.

7.27 Informative examples

This subclause includes all the GSM/UMTS supplementary service related commands, additional commands to lock

MT and SIM/UICC capabilities, and commands to check the network registration status.

An example where MSISDNs of a MT are queried, calls are forwarded to different numbers when mobile is busy (CFB)

or when it does not answer (CFNRy). The status of CFNRy is read:

AT+CNUM

+CNUM: ,"+358501234567",145,,4 (voice number)

AT+CCFC=1,1,"931123456" (enable CFB)

AT+CCFC=2,1,"921654321" (enable CFNRy)

AT+CCFC=1,2 (query CFNRy)

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 163 164

Pas de commentaire

CME GPP-3 Spécifications Page 68